|
|
|
|
Frequently Asked Questions ( FAQ )
|
|
Memory Upgrades
-
When handling memory, avoid touching the connectors or chips.
Hold the memory by its edges.
-
386DX, 486SX and 486DX computers that use 30 pin SIMMs require that upgrades to be
done in increments of 4 SIMMs of the same size.
-
386DX, 486SX and 486DX computers that use
72 pin SIMMs can be upgraded 1 SIMM at a time.
-
30 Pin SIMMs with 3 or 9 chips on them are Parity.
30 Pin SIMMs with 2 or 8 chips on them are Non-Parity.
-
Install memory starting with the lowest numbered socket
or bank (see your owners manual or UpgradePro for more
information).
-
All 586 computers require SIMMs to be installed in
pairs of the same size.
-
EDO memory (Extended Data Output) will only work in
computers that specify EDO memory.
-
If the computer displays a blank screen after installing
the memory, it may be installed improperly or it may be the
wrong type.
-
It may be necessary to change settings in your system's
bios after new memory is installed. Follow the screen
prompts to make the changes.
|
|
